YAMAHA TF1

รหัสสินค้า : TF1

รายละเอียดย่อ :ดิจิตอลมิกเซอร์ 16 ช่อง mixing channels ( รองรับได้ถึง 32 mono + 2 stereo + 2 return)

รายละเอียดทั้งหมด : YAMAHA TF1 ดิจิตอลมิกเซอร์ 16 ช่อง Mixing channels (รองรับได้ถึง 32 mono + 2 stereo + 2 return)

 Yamaha TF1 is a rack-mountable digital audio mixing console that features a touchscreen display, 17 motorized faders, and is expandable up to 40 input channels by adding the optional Tio1608-D I/O rack. Ideal for a multitude of live sound reinforcement scenarios, the TF1 can also be used for live recording, offering 34 x 34 channel digital recording and playback via USB 2.0 using a computer and your preferred DAW software, and 2 x 2 channel recording and playback using any USB storage device. 

The TF1 console itself provides 16 analog XLR/TRS combo mic/line inputs with 48V phantom power, as well as 2 analog RCA stereo line inputs, and 16 analog XLR outputs. Each combo input channel features a recallable D-PRE microphone preamp, as well EQ and two dynamics processors. In addition, the console offers eight powerful FX processors with patches ranging from reverb and delay, to modulation effects such as flanger and chorus, to utility processing like 3-band multi-band compression.

Features at a Glance:

• 17 motor faders (16 channels + 1 master)
• 40 input mixing channels (32 mono + 2 stereo + 2 return)
• 20 Aux buses (8 mono + 6 stereo) + Stereo + Sub
• 8 DCA groups with Roll-out
• 16 analog XLR/TRS combo mic/line inputs + 2 analog RCA pin stereo line inputs
• 16 analog XLR outputs
• 34 x 34 digital record/playback channels via USB 2.0 + 2 x 2 via a USB storage device
• Download information for CUBASE AI DAW software
• Optional rackmount kit
• 1 expansion slot for optional NY64-D Dante audio interface card
• Optional Tio1608-D Dante equipped I/O rack with 16 microphone/line inputs and 8 line outputs

Specs

Outline

Fader Configuration16 + 1 (Master)Mixing CapacityInput Channels40 (32 mono + 2 stereo + 2 return)Aux Buses20 (8 mono + 6 stereo)Stereo Buses1Sub Buses1Input channel functions8 DCA GroupsI/OInputs16 mic/line (XLR/TRS combo) + 2 stereo line (RCA pin)Outputs16 (XLR)Expansion slots1On-board processorsDSP8 Effects + 10 GEQUSB34x34 USB Audio Interface, 2-track recording via USB Storage Device

General specifications

Sampling frequency rateInternal48 kHzSignal delayLess than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHzFader100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all fadersTotal harmonic distortionLess than 0.05% 20 Hz–20 kHz @+4 dBu into 600 , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz)Frequency response+0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUTDynamic range110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain=Min.Hum & noise levelEquivalent input noise–128 dBu typ., Input Gain=Max. (Measured with an A-Weight filter)Residual output noise–85 dBu, ST master off (Measured with an A-Weight filter)Crosstalk–100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min.Power requirements100–240 V 50/60 HzPower consumption100 WDimensionsW510 mm (20.1in)H225 mm (8.9in)D599 mm (23.6in)Net weight13.5 kg (29.8lb)AccessoriesQuick Guide, Power Cord, CUBASE AI download informationOptionsRack-mount Kit RK5014, Expansion Card, Foot Switch (FC5)OthersOperating temperature range: 0–40 °C, Storage temperature range: -20–60 °C

Analog input characteristics

Input TerminalsGAINLoad

ImpedanceFor Use With

NominalInput LevelConnectorbalanced /

UnbalancedSensitivity*1NominalMax. before clipINPUT1-16+66dB7.5KΩ50-600Ω Mics

or 600Ω Lines-82dBu (61.6V)-62dBu (0.616mV)-42dBu (6.16mV)Combo Jack (XLR-3-31 type *2

or TRS phone *3)Balanced-6dB-10dBu (245mV)+10dBu (2.45V)+30dBu (24.5V)ST IN 1,2—10kΩ600Ω Lines-30dBV (31.6V)-10dBV (316mV)+10dBV (3.16V)RCA Pin JackUnbalanced

*1. Sensitivity is the lowest level that will produce an output of +4dBu (1.23V) or the nominal output level when the unit is set to maximum gain. (All faders and level controls are at maximum position.)

*2. 1: GND, 2: HOT, 3: COLD

*3. Tip: HOT, Ring: COLD, Sleeve: GND

*In these specifications, 0dBu = 0.775Vrms.

*+48V DC (phantom power) can be supplied to INPUT XLR type connectors via each individual software controlled switch.

Analog output characteristics

Output TerminalsSource

ImpedanceFor Use With

NominalGAIN SWOutput LevelConnectorbalanced /

UnbalancedNominalMax. before clipOMNI OUT 1-1675Ω600Ω Lines“+24dBu” position (default)

 +4dBu (1.23 V)+24dBu (12.3 V)XLR-3-32 type *1BalancedPHONES *3100Ω40Ω Phones—3mW75mWStereo Phone Jack (TRS) *2Unbalanced

*1.1: GND,2: HOT, 3: COLD 

*2 Tip: LEFT, Ring: RIGHT, Sleeve: GND 

*3 The position of the level control is lowered by 16dB from the maximum.

*In these specifications, 0dBu = 0.775Vrms. 

*All output DA converters are 24bit, 128times oversampling.

Digital input/output specifications

TerminalsFormatData lengthAudioConnectorUSB (TO HOST)USB24bit34ch input / 34ch output, PCMUSB (B type)iPadUSB—Playback: MP3 or WAV file data / Record: WAV file dataUSB (A type)

Control I/O specifications

TerminalsFormatLevelConnectorNETWORKIEEE802.310BASE-T/100Base-TXRJ-45FOOT SW——TS Phone